User manual

Biomark HPR and HPR Plus User Manual
Page 15 of 41
3.1.3 Memory
The Memory Settings menu allows the user to configure parameters associated
with tag reading and data storage. Not all parameters are available with HPR
Reader.
Memory Settings
 Tag Type – Selects which tag types to read (FDX-B and/or HDX)
 Store Tags – When unselected, read tags will be displayed on the screen,
but will not be stored into a file.
 File Number – Selects which file number to store tag reads into. The Reader
can store up to 100 different files.
 Send Tags – Selects which port(s) to stream live tag read data out of.
 Read Indicator – Choose to beep and/or flashing the blue Read Indicator
LED at bottom of unit when a tag is read.
 Unique Mode Timeout – Choose the time before a tag of the same number
will be re-read and stored when the Reader is operating in “Unique” mode. A
value of zero performs similar to Continuous mode.
 Geotag Enable – When selected will store GPS data with tag number.
 Single Tag Read – When selected, the Reader will read one tag then return
to Standby mode. The READ button needs to be pressed before another tag
can be read.
NOTE: Once a tag file contains more than 20,000 tags, a "Tag File Full" alarm will
occur. Tags will continue to be recorded in this file, however only 20,000 tags can
be displayed on the Reader screen.