User manual

Biomark HPR and HPR Plus User Manual
Page 29 of 41
6.2 Reports
To access the built in diagnostic reporting tools available with the HPR Plus, select
the “Reports” menu from the “Tools” menu. There are four types of reports
accessible from this menu. When a report is run, the results of the report are
shown on the screen and also recorded in the Reader’s log file. It is also possible
to configure the Reader to automatically run reports at specified intervals. In the
case of the automatic reports, the results are only stored in the log file and not
displayed on the Reader screen.
Reports Menu
6.2.1 Startup Report
The Startup Report is only generated once; when the unit is turned on. It can be
viewed at any time from the Reports menu, or through a command interface. The
reported values were current when the reader started up and do not reflect any
changes made afterwards.
Software Version number of the installed software
OS Version Version number of the installed operating system
External Power (V) Voltage of an external charger (if connected)
Battery (V) Voltage of the internal battery
Memory “OK” or an error message
Memory Usage (%) Percentage of memory used
Total Tags Total number of tags stored in all files
Tuning Tuning setting
Power Power setting