User manual

Biomark HPR and HPR Plus User Manual
Page 35 of 41
Appendix B - Installation of Legacy Serial Drivers
This instruction sheet details how to create a USB-serial connection between an
HPR or HPR Plus reader and computer. A serial connection will allow you to
communicate between the HPR and computer to download tag files and send tag
data to PIT tag programs such as P3, MiniMon and BioTerm. In addition to an
HPR and a computer, you will need a Windows XP or Windows 7 HPR Serial
Emulator Driver (provided by Biomark), an HPR USB cable, an available USB port
and communication software BioTerm.
Appendix B.1. Windows XP Driver Installation
 Unzip the HPR Serial Emulator Drivers on your computer.
 Connect the USB cable to the HPR and turn it on.
 Plug the USB cable into a USB port on your computer. The following
message will appear on the screen of the HPR:
 Quickly press the Serial button on the HPR. . You have 10 seconds to press
the Serial button or you will have to unplug the USB cable from the
computer and plug it back in to get the message back again.
 After pressing the Serial button on the HPR, the Found New Hardware
Wizard dialog box will appear on your computer:
 Select No, no at this time and click Next.