User manual

Biomark HPR and HPR Plus User Manual
Page 38 of 41
Appendix B.2. Windows 7 and Vista Driver Installation
When you plug the HPR USB cable into a Windows 7 or Vista computer, it will
automatically install its own driver, which is not compatible with HPR reader.
Therefore, you need change the driver to the Biomark HPR Serial Emulator driver.
 Unzip the HPR Serial Emulator Drivers on your computer.
 Connect the USB cable to the HPR and turn it on. Plug the other end of the
USB cable into an available USB port.
 Plug the USB cable into a USB port on your computer. The following
message will appear on the screen of the HPR:
 Quickly press the Serial button on the HPR. You have 10 seconds to press
the Serial button or you will have to unplug the USB cable from the
computer and plug it back in to get the message back again.
 A Windows driver will install automatically. Remember, this driver is not
compatible with the HPR reader. When it is finished, you will get the
following message:
 Go to your computer’s Device Manager (Control Panel -> System -> Device
Manager) and expand the Ports (COM &LPT). Right click on Gadget Serial
port and click Update Driver Software…