User's Manual

39
Chapter 6 -
Replacing and Installing System Components
Removing and Installing the RF Stim Unit
The RF Stim Unit should be removed only for the purpose of cleaning the
Orthosis or for its replacement.
Figure 21 shows how to detach the RF Stim Unit from the Orthosis cradle.
1. Release the RF Stim Unit from the cradle by pulling its upper edge out.
2. To reinstall the RF Stim Unit, insert the bottom prongs into the lower part
of the cradle and push its upper part gently into the cradle until a snap
sound is heard.
Cradle
RF Stim Unit
Figure 21: Removing the RF Stim Unit from the Orthosis
Warning: Do not turn the system on while the RF Stim Unit is out of the cradle