User's Manual

NESS L300 User Guide 19
4. Daily Use of your NESS L300
Activating and Using the System
Make sure the foot sensor is installed, if not, then install it according to
the section “Placing the Foot Sensor in your Shoe.”
1. Remove the protective covers from the electrodes
Put on the orthosis.
Turn on the control unit.
Select either the gait or training mode.
Begin walking or let the training mode exercise your leg in place.
Putting on the orthosis
In order to ensure proper foot movement make sure the orthosis is
positioned accurately.
Note
Before putting on the orthosis make sure to remove
the protective covers from the electrodes.