User's Manual

40
Problems and their solutions
Problem Solution
Any part of your NESS
L300 kit (Orthosis,
Stimulation Unit, Control
Unit, Foot Sensor etc.) is
broken, damaged or
becomes detached.
Contact your NESS L300 distributor.
The Control Units' display
does not light up when you
switch ON the Control
Unit.
Make sure the battery is charged (see the
section "Charging the batteries" for
instructions).
If, after charging the battery, the Mode
display still does not appear, contact your
NESS L300 distributor.
A problem which is not
covered in this manual
occurs
Contact your NESS L300 distributor.
During charging, "E"
appears on the screen.
Try to reconnect the charger cable, if this
doesn’t help contact your NESS L300
distributor.
Electrodes are frayed,
peeling, damaged, or
falling off the Orthosis.
Replace with new electrodes according
to the section "Replacing Electrodes"
After charging your
batteries, they are still low.
Your batteries need replacing.