User's Manual

23
Chapter 4 -
Daily Use of your NESS L300™
Adjusting the Stimulation Intensity Level
When the Control Unit is turned on, the stimulation intensity level starts
at level 5, which is the default stimulation intensity level. Normally there is
no need to adjust the stimulation intensity; however, it may be necessary
while walking on different surfaces or with various shoes. When necessary,
the stimulation level can be manually adjusted by pressing the
or
buttons on the Control Unit.
If the intensity is reduced to 0, no stimulation will be applied.
To lift the foot higher:
If the foot slightly drags or catches on the floor while walking, the stimulation
level can be increased by pressing the button.
To decrease foot lift:
If your foot rises too high while walking or if the stimulation is unpleasant, the
intensity level can be reduced by pressing the
button. Be sure that your
foot does not drag or catch on the floor after reducing the intensity level.
When the intensity level is altered, its level appears on the display of the
Control Unit and a corresponding beep is emitted.