User's Manual

35
Chapter 5 -
Care and Maintenance
Cleaning your NESS L300™
All parts may be cleaned by carefully wiping with a damp cloth.
Electrical components are not waterproof, so do not immerse them in
water.
The Orthosis is the only component that can be immersed in water
for cleaning.
When the Orthosis needs a thorough cleaning:
1. Remove the RF Stim Unit (see "Removing and Installing the RF Stim
Unit" section).
2. Immerse the Orthosis for 30 minutes into lukewarm water with a small
amount of mild detergent.
3. Rinse thoroughly under running water.
4. Immerse the Orthosis for an additional 15 minutes into clean lukewarm
water.
5. Rinse again under running water.
6. Let dry in shade (do not hang).
The Orthosis should dry fully in 4 to12 hours according to climate and
humidity.
7. Reattach the RF Stim Unit once the Orthosis is completely dry.
Do not use a washing machine or drier.