User's Manual

Adjusting the stimulation intensity level

During the fitting process your clinician set the stimulation type and

intensity according to your exact needs, normally there is no need to

adjust the stimulation intensity however it may be necessary while

walking on different surfaces or with various footwear.

To lift the foot higher

If the foot slightly drags or catches on the floor while walking the

stimulation level should be increased by pressing the "+" button.

To decrease foot lift:

If you feel that your foot rises too high while walking or that the

stimulation is unpleasant, the intensity level can be reduced by pressing

the "-" button. After reducing the intensity take care that your foot doesn’t

drag or catch on the floor.

• When the intensity level is altered the intensity level appears

on the display of the control unit and a corresponding beep is

emitted

• When the system is turned on the intensity is automatically

set to “5” which is the intensity set by the clinician if the

intensity is reduced to “0” there will be no stimulation.

Note

Do not increase the stimulation intensity level set for you by your

clinician by more than two levels without first consulting him or her.