User Manual

99
Chapter 9 - Component Maintenance and Cleaning
3. Wet the new cloth electrodes with tap water until they are saturated. See
Figure 65.
4. With a soft cloth, gently wipe or blot excess water off the back (side with
the snap) of the cloth electrodes. See Figure 66.
5. Attach the Thigh FS Cuff cloth electrodes to the Thigh FS Cuff. See
Figure 67.
Note: Remove and re-wet the cloth electrodes every time you remove the
Thigh FS Cuff from your leg for more than one hour, and after every four hours
of use. When wetting the cloth electrodes, always remove them from the Thigh
FS Cuff. If the cloth electrodes dry out, your response to the stimulation may
change. If you need to adjust stimulation intensity more often than usual, try
re-wetting the cloth electrodes following the steps listed above.
Figure 65: Wetting the Thigh FS Cuff cloth electrodes.