User's Manual

5
Device Description
Clinician Programmer with Software
The StimRouter clinician programmer is used to program, test and save stimulation parameters
and programs on the StimRouter EPT and patient programmer. See Figure 5-1. All stimulation
parameters and programs are stored on the clinician programmer as well.
When connected to the StimRouter clinician programmer cradle and patient programmer, the
clinician programmer can wirelessly communicate with the EPT.
Touchscreen Display
SD Slot
with Memory
Card Installed
On/Off Button
24-Pin Connector Port
Reset Button
Figure 5-1. The StimRouter clinician programmer.
The clinician programmer is portable and comes with the StimRouter software installed, a memory
(SD) card installed, a rechargeable Lithium- Ion battery installed and a clinician programmer
charger.
Chapter 5 - Device Description
19