User's Manual

WARNING: The clinician programmer should only contain the installed Windows Mobile®
operating system and Bioness Inc proprietary StimRouter software. Do not use the clinician
programmer for any purpose other than that described in this manual. Third-party software packages
are not supported and may interfere with proper operation of the StimRouter components, thus
voiding the warranty.
Component Description
Hewlett Packard iPAQ 200 Enterprise Handheld internally powered personal digital assistant
with StimRouter proprietary software installed.
Note: Refer to the HP web site for a description of the Hewlett Packard iPAQ 200 Enterprise
Handheld, device specifications and instructions for use.
Operating Buttons
On/Off. Used to turn the clinician programmer on and off.
Reset. Used to soft reset the clinician programmer.
LEDs
Power Indicator Light.YELLOW when the clinician programmer is charging; GREEN when the
clinician programmer battery charge is complete.
Bluetooth Enabled Indicator Light. BLUE when Bluetooth is ON.
SD Slot
Contains the clinician programmer memory (SD) card.
Battery
Removable/rechargeable 2200 mAh Lithium-Ion battery.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to local regulation.
Touchscreen Display
Used to navigate the StimRouter application, read statuses and enter data. Use the pointed
end of the stylus to make contact with the display screen. Use only the stylus. Do not use sharp
objects such as pencils or pens on the touchscreen display.
20
Clinician’s Guide