User's Manual

Tester
Used to confirm that the EPT is working properly. See Figure 5-3.
Figure 5-3. The tester.
The tester is used to diagnose stimulation problems in the EPT. It provides audio feedback
when connected and stimulation is applied.
Clinician’s Software Navigation
The StimRouter clinician’s software is provided installed on the clinician programmer.
Operating Modes
The StimRouter application has two operating modes: online and offline.
Online. The StimRouter clinician programmer is online when connected to an operational StimRouter
patient programmer and EPT. See Table 5-1.
Offline. The StimRouter clinician programmer is offline when not connected to an operational
StimRouter patient programmer and EPT. See Table 5-1.
Chapter 5 - Device Description
23