User's Manual

•
FLASHING RED with “i” in the center when a patient programmer is connected
and a correctable error has occurred (for example, RF communication failure).
CONSTANT RED with “i” in the center when a patient programmer is connected
and an error has occurred.
FLASHING YELLOW with “i” in the center when the StimRouter patient
programmer or EPT battery charge level is low.
•
•
Print Icon
Used to print patient reports.
Data Entry
Keyboard. Used to enter characters in a field that requires alphanumeric input. The
keyboard appears collapsed at the bottom right or center of most screens. To enlarge or reduce
the keyboard, touch the keyboard with the stylus. To enter data, select each character using the
stylus.
Drop-Down Lists. Used to select a value. Press the down arrow to display the values. Use the
stylus to select a value. See Figure 5-6.
Figure 5-6. Illustrative drop-down lists for waveform, phase duration and pulse rate.
Menu Bar and Menus
The StimRouter application has five navigation menus, which appear on the menu bar. See
Figure 5-7.
Figure 5-7. Menu bar.
Exit. Used to exit or logoff the StimRouter application.
Patients. Used to open a patient record, add a new patient, modify a patient record or remove
a patient record.
Chapter 5 - Device Description
25