User's Manual

Table 5-5. Pulse parameters.
Chapter 5 - Device Description
31
*Intensity: A measure of strength of the stimulation.
**Positive phase duration: A measure of the duration of a pulse.
***Pulse repetition rate: The number of times per second a pulse is delivered.
Parameter
Specification
Total Pulse Duration
Up to 2550 microseconds (depends on waveform)
Maximum Load
5000 ohms (subject to max voltage limitation) in parallel
to 80 nanofarads
Typical Load
2700 ohms in parallel to 22 nanofarads
Minimum Load
100 ohms in parallel to 1 nanofarad
Pulse Repetition Rate***
1, 2, 5, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100, 120, 140,
160, 180, 200 hertz