User's Manual

Connecting the Patient Programmer and Configuration Cradle
To connect the patient programmer and configuration cradle:
1.
2.
Open the flexible cover on the patient programmer.
If necessary, charge the patient programmer using the system charger set provided in
the User Kit. Insert the Y cable connector into the charging socket; plug the charger into
a power socket. See Figure 6-4.
Figure 6-4. Charging the patient programmer.
WARNING: Use only the charger included in the StimRouter User Kit. (Refer to Manufacturer
Model No. FRIWO FW7333SM/05 or FRIWO FW7333CM/05).
3. Plug the connector cable of the configuration cradle into the connector port of the
patient programmer. The white arrow should be facing up. See Figure 6-5.
Connector Cable
Figure 6-5. Patient programmer connection configuration.
36
Clinician’s Guide
Patient Programmer
Charging Socket
Flexible Cover
Connection Port
Charger Cable
Connector