User's Manual

To adhere the StimRouter electrode:
1.
2.
Remove the reusable StimRouter
electrode liner and store it in the StimRouter electrode carrying case. The StimRouter
electrode liner is larger than the electrode and is marked with the Bioness logo. See
Figure 6- 8. Do not bend, break or soil the StimRouter electrode liner.
Figure 6-8. Remove the StimRouter electrode liner.
3.
Visually inspect the gel electrodes. Make sure the gel is smooth and attached to the
StimRouter electrode. The gel should align with the contour of the StimRouter electrode
and completely cover the base of the StimRouter electrode. Make sure the gel
electrodes are not dry.
Chapter 6 - Set-Up Instructions
39
Protective Covers