User's Manual

•
•
•
Adjust stimulation intensity using the patient programmer.
Save a new stimulation intensity level on the patient programmer.
Turn stimulation off using the patient programmer.
Removing the StimRouter Electrode from the Skin/Body
It may be necessary during set up to remove the StimRouter electrode to reposition it or test
the EPT.
To remove the StimRouter electrode:
1.
To remove the StimRouter electrode, make certain that stimulation is turned off. Then
grasp the tab on the StimRouter electrode and gently pull away from the skin. See
Figure 6-13.
Figure 6-13. Removing the StimRouter electrode.
2.
Obtain a StimRouter electrode liner to protect the gel electrodes from drying out. Attach
the liner to the gel electrodes.
Store the StimRouter electrode with the liner attached in the StimRouter electrode
carrying case.
3.
42
Clinician’s Guide
StimRouter Electrode
Tab