User's Manual

Figure 7-1. Unassigned system detected.
3.
If this prompt does not appear and the patient’s components are new, then reset the
patient programmer and EPT. See “Resetting the Patient Programmer and EPT” section
of this guide.
Press “New” to create a new patient record.
When the New Patient screen opens, enter the patient’s first and last names and a
patient ID. See Figure 7-2.
4.
5.
Figure 7-2. Adding a patient with an unassigned system.
6.
Proceed to “Programming Instructions” section of this guide.
46
Clinician’s Guide