User's Manual

Modifying a Patient Record
Note: “Modify” is only enabled in online mode, when the clinician programmer is connected to
a working patient programmer and EPT.
To modify a patient record:
1.
2.
3.
Press the PATIENTS MENU to view the Patient List.
From the Patient List, press “Modify.”
Enter changes to the patient’s first or last name, and then press “OK.” See Figure 7-6.
Patient ID cannot be modified.
Figure 7-6. Modifying a patient record.
Removing a Patient Record
Note: “Remove” is only enabled in offline mode.
To remove a patient record:
1.
Make certain that the clinician programmer is not connected to an operational patient
programmer and EPT, i.e., that the clinician programmer is in offline mode. The
information icon should not be GREEN.
Press the PATIENTS MENU to open the Patient List, select the patient record to
remove, and then press “Remove.” See Figure 7-7.
2.
50
Clinician’s Guide