User's Manual
7. The program save date will appear on the Program Bar.
Note: If an intensity adjustment during testing causes the maximum charge level to be reached,
then a notification will appear. No further increase will be allowed. See Figure 9-4.
Figure 9-4. Maximum charge level reached.
Programming Time Settings
To program time settings:
1.
2.
From the STIM SETTINGS TAB, press the TIME SETTINGS TAB.
The default time setting is constant stimulation. When “Constant Stim” is checked,
“Time On” and “Time Off” are disabled; “Ramp Up” and “Total Time” can be
adjusted.
To
change the duty cycle, uncheck “Constant Stim” and adjust “Time On” and “Time Off.”
See Figure 9-5.
Figure 9-5. Programming time settings.
Chapter 9 - Programming Instructions
67