User's Manual

3. Press “Test” to test the time settings; stimulation will turn on.
4. Fine-tune the intensity level (using the up/down arrows).
Note: If an intensity adjustment during testing causes the maximum charge level to be reached,
then a notification will appear. No further increase will be allowed. See Figure 9-6.
Figure 9-6. Maximum charge level reached.
5. Press “Stop & Save” to stop stimulation and save the time settings to the clinician
programmer, patient programmer and EPT.
6. The program save date will appear on the Program Bar.
Programs
Delete Program Icon
Add Program Icon
Print Icon
Back Program Arrow
Next Program Arrow
Figure 9-7. Add a program icon, back program arrow,
next program arrow, delete program icon, and print icon.
68
Clinician’s Guide