User's Manual

Troubleshooting Wireless Technology
The patient programmer will emit audio and visual alerts if RF communication fails. See below.
Report problems your local distributor.
Privacy of StimRouter Wireless Communication
While the frequency band used by the StimRouter wireless system can be used by other users
of the band, the privacy of the StimRouter wireless system is ensured by:
•
•
•
•
•
•
The unique ID of paired components.
Proprietary communication protocol.
Use of randomized frequency channels (frequency hopping).
Use of whitening function (data randomizing).
Bluetooth communication is used exclusively in the clinician’s office.
Bluetooth serves for the communication between the Clinician’s Programmer System
(CPS) and a HP printer using a paired HP bt500 wireless adapter.
There is a risk of an interruption in the wireless communication resulting in the StimRouter system
not responding to the user input.
Failure
Chapter 12 - Technical Specifications
85
RF Icon FLASHES RED
Radio Communication Failure or EPT Battery
• Make sure the patient programmer and EPT
are within 10 feet of each other.
• If the components are within range, then turn
the patient programmer off and back on.
• Connect the EPT to the charger.• Re-register
the components. Contact your local distributor.