User Manual Part 3

Chapter 7 - Setting Up the NESS L300 Plus System

Note: If your shoe does not have a detachable insole, place the pressure

sensor on top of the insole. Then, place a generic (one layer versus two)

insole over it. Generic insoles can be purchased from drugstores, shoe stores,

or Bioness. Contact the Bioness Client Relations Department at (800)

211-9136, Option 2.

2. Point the wire of the pressure sensor toward the toe of the shoe. Then

press the pressure sensor to the gait sensor pad. See Figure 7-8.

CAUTION: The Intelli-Sense Gait Sensor has not been validated

for use by individuals weighing more than 300 pounds (136

kilograms).

Foot Image on

Pressure Sensor

Gait Sensor Pad

Wire

Figure 7-8: Positioning the pressure sensor in the heel of the shoe

Note: Refer to the foot image on the pressure sensor for correct orientation.