User Manual Part 3

82
User's Guide
2. Press the plus or minus intensity adjustment button on the
L300 Plus Control Unit to change the intensity level.
The L300 Plus Control Unit will beep with each change in level. The new
level will show in the digital display.
Note: An intensity level of “0” equals no stimulation.
Note: When the system is turned on, the default stimulation intensity level
is restored.
Adjustment Guidelines
If your foot slightly drags or catches on the floor while walking, increase the
stimulation intensity in the L300 FS Cuff to lift the foot higher.
If your foot rises too high while walking or if stimulation is unpleasant, decrease
the stimulation intensity in the L300 FS Cuff. Be sure your foot does not drag
or catch on the floor after decreasing the intensity level.
Consult your clinician if you have questions.