User Manual Part 3

71
Chapter 7 - Setting Up the NESS L300 Plus System
Testing the Position of the Thigh FS Cuff
To test the position of the Thigh FS Cuff:
1. Place the L300 Plus Control Unit in standby mode.
2. Press the Thigh RF Stim Unit selection button. The arrow next to the
Thigh RF Stim Unit indicator will light GREEN to confirm the selection.
3. Press and hold the stimulation test button. The Thigh RF Stim Unit will
stimulate until the stimulation test button is released.
If the Thigh FS Cuff is not positioned correctly:
1. Turn off the L300 Plus System.
2. Loosen the Thigh FS Cuff.
3. Slowly lift the Thigh FS Cuff from the skin.
4. Make sure the Thigh cloth electrodes are wet and attached correctly.
5. Repeat the steps for putting on the Thigh FS Cuff.
6. Retest the position of the Thigh FS Cuff.
Note: Do not rotate (slide) the Thigh FS Cuff on the leg while it is fastened.
Rotating the Thigh FS Cuff while it is fastened could loosen or damage the
Thigh cloth electrodes.
CAUTION: Remove the Thigh FS Cuff from the skin every 3 to
4 hours for 15 minutes to allow the skin to breathe.