User's Manual

Meter Activation and Battery Change

Your Blood Glucose Meter comes with two AAA, batteries installed. Two new batteries will provide

power to perform approximately 800 tests under normal use with one data transfer. Press the main button or insert a

strip to activate your meter.

Rightest GM232B

1. Turn the

over.

Press and slide the battery

cover to open.

Rightest Blood

Glucose Meter GM232B

CAUTION

- Please follow the local regulation to properly discard a used battery.

- Risk of explosion if battery is replaced by an incorrect type.

4. The Blood Glucose Meter

5. Press any button to exit the self-test and enter Setting Mode.

Rightest

(all symbols will appear on the screen).

6. You must set the time and date when replacing the battery. See Chapter “Setting Up Your Meter - Setting the Date,

Time, and Volume" on page 18. Test results are still stored in the memory.

GM232B will enter Self-Testing Mode automatically when replacing the battery

3. Slide the battery cover back until

it snaps into place.

2. Install the batteries. Be sure to

put the batteries in the correct

direction.