User's Manual

Performing a Blood Glucose Test

7. Hold the base in one hand and pull on the plunger with the other hand. The device

will be cocked. Release the plunger and it will automatically move back to its

original position near the base.

8. Wash your hands with warm soapy water and dry thoroughly.

9. Take one Rightest Blood Glucose Test Strip from the vial. Close the vial

cap immediately.

10. Insert the strip into the test strip port of the Rightest Blood Glucose Meter

with the view window facing up.

11. Once the strip is inserted, all symbols will appear on your meter display and will be

accompanied by a beep (if volume is turned on).

GM232B

NOTE

- The will automatically detect the Code

number on the strip. You do not have to check the Code number on the meter

display and strip vial.

Rightest Blood Glucose Meter GM232B

12. A blood drop icon will appear on the display window and will be accompanied by

a beep (if volume is turned on). Apply the blood sample within 2 minutes.

13. Place the lancing device against your fingertip and press the release button.

14. Touch and hold the blood drop to the edge of sample port until the view window

is filled with blood. If the view window is not completely filled with blood the test

will not start. If the blood sample was insufficient, discard the test strip and

repeat with a new Rightest Blood Glucose Test Strip .

15. Countdown Mode will begin on the display window. After 5 seconds, your test

result will appear.

GM232B

1312

14b

14a

14c