User's Manual

Recalling Test Results

The Blood Glucose Meter is able to automatically store a maximum of 500 test results with time

and date. If your meter has stored 500 results, the newest test result will replace the oldest one.

To recall your test memory, start the meter without a test strip inserted.

Rightest GM232B

1. Press the Main button to switch from the Time Mode to Memory Mode. You will see the “mem”

icon in the upper left corner of the display. The latest test result will appear with the number “1”.

2. Use either the Left or Right button on the side to review all previous results with date and time.

Results display from the most recent (Sequence no. “1”) to the oldest (Sequence no. “500”) in the

lower right hand corner of the screen.

3. The Quality Control Test result can be recalled from the saved data. When " " appears under

the data, the test was performed using the . The control solution

test result will not be used when recalling test average results.

Rightest Control Solution GC550

1. Press the Main button to switch the screen to Average Mode.

2. On the average screen, use either the Left or Right button to view 1-day, 7-days, 14-days, 30-days, 60-days or

90-days averages.

3. The number shown in the lower right hand corner indicates how many test results have been calculated.

4. Excluding test results from the average calculation:

You may exclude the test result from average calculation right after each test.

You have to perform this exclusion immediately after the meter displays the reading of your test result.

Press the Right or Left button to choose " " then press the main button to confirm. The test result is now

excluded from averaging.

The Blood Glucose meter provides several average test results. View the 1-day, 7-days, 14-days,

30-days, 60-days and 90-days average test results for better blood glucose monitoring.

Rightest GM232B