User's Manual

Planning the Installation

Part No. 430-4G-200-00-000

2-3

Every installation is unique. Sometimes the issues are well defined and can be handled in a

standard fashion; sometimes the issues are very specific and may not be immediately recogniz-

able.

L-1 EAS recommends following these steps for a successful installation:

Plan the installation - Choose the type of hardware required, decide if a network is required, and

decide on the location and number of required devices.

Unpack all items - Unpack all items and check against the packing list.

Install network hardware components - Install the cabling and components needed to run the

system.

Install software - Install the software needed to set up the devices.

Preconfigure device - Connect the device to the USB cable, supply power to the device, and

preconfigure the device.

Mount devices - Mount the devices in their final locations

Power distribution and device hook up - Connect the device wiring via the back panel.

Power-up procedure - Check the power connections and start the system safely.

Enroll users - Enroll users into the system (for user enrollment procedures).

Chapters 3 through 7 in this document present more information on these steps.

2.1. R

ECOMENDED STEPS FOR A SUCCESSFUL INSTALLATION