User's Manual

Planning the Installation

Part No. 430-4G-200-00-000

2-7

2.4. C

HOOSING THE INSTALL LOCATION

V-Station 4G and V-Flex 4G devices are designed to mount on either a double-gang electrical

box or on any flat surface. Consult with local professionals regarding any building and safety

codes that might affect your installation. The correct mounting height is shown below in Figure

2-1.

Factors to consider when determining the position of a device on the wall:

• Proximity to other switch plates or fixtures (the device should ideally be mounted in-line

with other plates or fixtures)

• Distance from the floor to the top of the device (L-1 EAS recommends using a height be-

tween 48 and 54 inches).

• The device should be mounted on the knob-side of the door

• Compliance with the Americans with Disabilities Act if in the United States. Information

about this Act is available at http://www.usdoj.gov.

48 – 54”

Figure 2-1: Correct Mounting Height