User's Manual

Install Hardware

Part No. 430-4G-200-00-000

4-7

The V-Station 4G and V-Flex 4G devices can be powered either by 12V DC power sources or

through a Power Over Ethernet (PoE) injector.

The two options for providing 12V power to V-Station 4G and V-Flex 4G devices are by using an

external wall plug-in adapter, as shown in Figure 4-6, or through external wiring and a mini plug

as shown in Figure 4-7.

4.6. C

ONNECT DEVICE TO POWER SOURCE

2.1 mm Tip

Center = Positive

Plug-In 12 VDC

Adapter

1 – PWR

2 – GND

3 – EARTH

Earth Ground

Mini

Connector

External 12 VDC

Power Source

Figure 4-6: Connections for an External Wall Adapter

Figure 4-7: Connections for an External Power Source

Both devices must be earth grounded using the 3-pin mini-connector, regard-

less of what power source is being used.

NOTICE