User's Manual

Install Hardware

Part No. 430-4G-200-00-000

4-9

STANDARD

SOURCE LOAD REMARKS

Ethernet RJ-45 connector pin number

Source

Voltage

1 2 3 4 5 6 7 8

Load

Voltage

DC Load

Connector

IEEE 802.3af

using spare

pairs

48 V DC,

protected

RX RX TX DC+ DC+ TX DC- DC- (embedded)

Industry

Standard for

embedded

PoE

Figure 4-10: RJ45 Pin Location

Table 4-1: PoE Pin Assignments

The V-Station 4G and V-Flex 4G devices support both RS-232/RS-485 and Ethernet 10baseT

and 100baseTX network protocols.

4.7. C

ONNECT DEVICE TO NETWORK

Ethernet connections to the device are made through a standard RJ-45 connector on

the back of the device. Refer to Figure 4-10 and Table 4-1 for RJ-45 pin assignments

and locations.

4.7.1. E

THERNET NETWORK CONNECTIONS

To connect a device to an RS-232 or RS-485 network, connect the appropriate wires to

the provided pigtail in accordance with the pin-out diagram in Figure 4-11 (next page).

4.7.2. RS-232/RS-485 N

ETWORK CONNECTIONS