User's Manual

Install Hardware

Part No. 430-4G-200-00-000

4-14

The Aux port is a USB 2.0 auto-negotiate connector located on the bottom of the device (see

Figure 4-14). To access the Aux port, the Aux port door must first be removed. Use the provided

pin-in-hex security key to remove the #6-32 security screw retaining the plastic Aux port door.

Gently remove the plastic Aux port door to reveal the USB connector.

To attach a USB memory key (see Figure 4-15) or other "gadget" serial device by way of the

Aux port, use the USB Type A female to USB Micro A/B male adapter cable provided in the in-

stallation kit.

The Aux port is used to transfer files to and from the device. Audio, images, firmware, logs, and

configuration files can be transferred quickly and easily to a device without the need for a com-

puter.

4.9. A

UX PORT

Current rating of the Aux port is not to exceed 100 mA Maximum.

CAUTION

Figure 4-14: Location of Aux Port (V-Station 4G)

Figure 4-15: USB Memory Key