User's Manual

Install Hardware

Part No. 430-4G-200-00-000

4-15

In order for the V-Station 4G and V-Flex 4G devices to comply with FCC Class B & CISPR 22

Class B regulations, the installer and/or end user is required to use the supplied Ferrite Material

on the Ethernet, DC, and all I/O cables exiting the rear of the device. This ferrite material is lo-

cated within the installation kit that is supplied with each product.

Ethernet Ferrite P/N: STEWARD 28A2432-0A2

DC & I/O Lines P/N: STEWARD 28A4155-0A2

Install the ferrite cores as close to the device as possible, as shown in Figure 4-16 below.

4.10. I

NSTALL FERRITE CORE

Figure 4-16: Installation of Ferrite Cores