User's Manual

Configure Device

Part No. 430-4G-200-00-000

6-5

4. Select either Serial Port - this machine or Ethernet radio button.

5. Enter the appropriate connection details.

If you are connecting via USB/RS-232:

Enter the appropriate Port Number (to determine the correct port number, look in the Win-

dows Device Manager for a "Gadget Serial" entry under the "Ports (COM & LPT)" heading),

Baud Rate, and Device ID.

If you are connecting via RS-485:

Enter the appropriate Port Number (to determine the correct port number, look in the Win-

dows Device Manager for your RS-485 entry under the "Ports (COM & LPT)" heading),

Baud Rate, and Device ID.

If you are connecting via Ethernet:

Enter the network IP Address of the device you want to connect to.

6. Click Next. The Step 2 Device Information dialog box is displayed (see Figure 6-6).

6. Click Next. The Step 3 Server Communication Parameter dialog box is displayed (see

Figure 6-7 on the next page).

The first time a V-Station 4G or V-Flex 4G device is connected to the com-

puter via the USB/RS-232 interface, the Windows Found New Hardware

Wizard might start. As all required device drivers are installed when Secu-

reAdmin is installed, simply follow the prompts, accepting the default choices

when possible, to install the device.

NOTICE

Figure 6-6: Step 2 Device Information Dialog Box