User's Manual

Configure Device

Part No. 430-4G-200-00-000

6-6

7. Select the radio button that corresponds how the server will connect to the device, either by

Serial Port or by Ethernet.

8. If connecting via RS-232 or RS-485, enter the appropriate Port, Baud Rate, and Device ID

(if using RS-485, also select the RS-485 check box). If connecting via Ethernet, enter the

network IP Address of the device (select the DHCP check box if dynamic IP addressing is

used).

9. Click Next. The Step 4 Register Device dialog box is displayed (see Figure 6-8).

10. Enter a Device Name.

11. Select the Group the device will belong to from the drop-down menu.

12. Click Register. The Device Summary dialog box is displayed (see Figure 6-9 on the next

page).

Figure 6-7: Step 3 Server Communication Parameter Dialog Box

Figure 6-8: Step 4 Register Device Dialog Box