User's Manual

Maintenance and Cleaning
Part No. 430-4G-200-00-000
© 2009, L-1 Identity Solutions Inc.
7-7
7.1.3. C
ALIBRATING THE SENSOR
After a device sensor is replaced, it must be calibrated before it can be used.
To calibrate a device:
1. Select Sensor Calibration in the Tools drop-down menu. The Calibration Wizard
dialog box is displayed (see Figure 6-10).
Figure 7-6: Calibration Wizard Step 1 of 2 Dialog Box
2. Select the device you want to calibrate in the Current Device menu.
3. Click Calibrate. Wait as the device sensor is calibrated.
4. Click Next. The Calibration Wizard Step 2 dialog box is displayed (see Figure 6-11
on the next page).