User's Manual

October152009–InstallationGuideDraft–EditPurposesOnly Page57
Installation Guide – October 2009 – Edit Purposes Only
2009
4.1.8 AUX PORT
The Aux port is a USB 2.0 auto-negotiate connector located on the bottom of the
device. To access the Aux port, the Aux port door must first be removed. Use the
provided pin-in-hex security key to remove the #6-32 security screw retaining the plastic
Aux port door. Gently remove the plastic Aux port door to reveal the USB connector.
To attach a USB memory key or other "gadget" serial device by way of the Aux port,
use the USB Type A female to USB Micro A/B male adapter cable provided in the
installation kit.
The Aux port is used to transfer files to and from the device. Audio, images, firmware,
logs, and configuration files can be transferred quickly and easily to a device without the
need for a computer.
CAUTION
Current rating of the Aux port is not to exceed 100 mA Maximum.
Figure 4-15 Location of Aux Port (V-Station 4G)