User's Manual

October152009–InstallationGuideDraft–EditPurposesOnly Page63
Installation Guide – October 2009 – Edit Purposes Only
2009
Figure 6-2 Register via Server Dialog Box
Select the Search Automatically check box (UDP protocol must be enabled on the
net-work.
Click the Scan button. SecureAdmin scans the network for connected devices and lists
the results. Devices with "plus" signs in their icon are available to add.
In the list, click the icon of the device you want to register. The server communication
parameter dialog box is displayed. A Register Device dialog box is displayed.
Select the communication parameter (if connecting via RS-232 or RS-485), enter
the appropriate Port, Baud Rate, Device ID, and select the communication protocol
from the drop-down. If connecting via enter the network IP address of the device
(selectthe DHCP check box if dynnamic IP addressing is used).
Figure 6-3 Register Device Dialog Box