User's Manual

S ENSOR C ONFIGURATION

Sensor Configuration

Note: This feature has been disabled in recent versions of

VeriAdmin, including v4.3

Choosing the Sensor Configuration menu item will allow the reader’s

sensor settings to be altered. It is recommended that only advanced

users attempt to modify these settings since they can drastically affect

the fingerprint reader’s performance. Please call Bioscrypt Technical

Support with any questions before attempting modifications.

The Bioscrypt sensor needs to be

calibrated for optimal performance.

For Veridicom Sensors:

To perform this task the user should place their

finger on the sensor of the reader identified by

the current Communication settings. Next, press

the CALIBRATE button and hold the finger

steady until the progress bar completes. The

new values will be displayed and the VeriAdmin

software will ask if you want to see a test image.

With the finger still on the sensor, select YES. An

image will be scanned and displayed. If the

image looks good, choose YES to accept the new

values.

For Authentec Sensors:

To perform this task the user should NOT place

their finger on the sensor of the reader. Press the

CALIBRATE button.

The TEST IMAGE button will scan and display

a fingerprint image.

Figure 34: Sensor Configuration Menu

Figure 35: Sensor Configuration

NOTE: A Network ID of –1 is

NOT valid for these operations