User's Manual

W IEGAND U TILITIES

Figure 45: Wiegand Card Utilities Dialog

Wiegand Utilities

(* requires firmware v3.2 or higher)

Choosing the Wiegand Utilities menu item will allow users to define

specific Administrator IDs that will not require a fingerprint to initiate the

ENROLL and DELETE actions.

Under Normal operations, ENROLL and DELETE COMMAND CARDS

require a fingerprint verification to be performed that ensures the correct

person is using the ADMIN card.

The Wiegand Utilities Dialog allows Administrators to create specific IDs

that can initiate the following operations:

Figure 44: Wiegand Utilities

- Create ENROLLMENT

Administrator Command Card

- Enroll User/Card

- Create DELETE Administrator

Command Card

- Delete User/Card

By entering a Card ID in the

appropriate box and pressing the

SAVE key, that ID will be stored in

the VeriSeries Unit memory. When

a card that contains that ID is

presented to the VeriSeries

Product, the appropriate action will

be initiated.

This feature has been added to

allow installers to create ENROLL

and DELETE ADMIN Command

Cards without a PC if the unit has

been properly pre-configured for

specific card IDs by using this

feature. Once these initial cards

have been created, we recommend

deleting the pre-configured IDs with

the CLEAR ALL buttons.