User's Manual

A PPENDIX C – V-PASS T EMPLATE D IFFERENCES

For installations using a “Mixed” network where both V-PASS units and VeriFlex / VeriProx /V-

Smart units are used, Bioscrypt recommends the follow guidelines to help manage templates:

1. A PC-based enrollment stations using the VeriAdmin software should be used for

all template enrollments.

2. All enrollments should be done using a V-PASS and stored on the PC.

3. V-PASS templates can be converted to VeriProx / VeriFlex templates using the

VeriAdmin Software (see the Template Conversion section). After this process,

the Administrator will have both a V-PASS compatible template and a VeriProx /

VeriFlex compatible template for each user.

4. Use the Bioscrypt designated extensions of “.tem” for VeriFlex / VeriProx

templates and “.mtm” for V-PASS templates.

Example:

• PC Enrollment station is setup with an attached V-PASS unit and running the

VeriAdmin Management software.

• Using the Advanced Enrollment dialog, the Administrator will enter an ID (ex:

1122) and sample enroll 3 different fingers and chose the best one as indicated

by the software.

• This fingerprint template will be save to the PC (ex: 1122_0.mtm).

• The Administrator will use the Template Conversion utility to create a VeriFlex /

VeriProx template (ex: 1122_0.tem).

• Template 1122_0.mtm will then be transferred to all V-PASS units.

• Template 1122_0.tem will then be transferred to all VeriFlex / VeriProx / V-

Smart units.