User's Manual

B ROADCAST P ARAMETERS

Broadcast Parameters

The Broadcast window allows you to modify settings on all units in a networked

environment at the same time (See Appendix B). Under most circumstances, you

will use this window when communicating over the Host Port (recall that the Aux

Port primarily is for communicating with a single unit). You will note that the

window is similar to the Unit Parameters window.

Figure 21: Broadcast Parameters Window

Note: As with the BII_Unit Parameter Settings window, change one

setting at a time and click the Broadcast button after each change.

For example: if you wish to change the Security Threshold and the

Wiegand Out string: 1) change the threshold; 2) click the

Broadcast button in the security section; 3) change the string; and,

4) click the Broadcast button in that section.

The PC baud

rate will update

automatically.

Enter the ID#,

then either:

enter the

Index#, or check

the Delete all

indices… box