User's Manual

A PPENDIX D – V-SMART O PERATIONS

100

This dialog initially shows the ESI information and a blank card. Pressing the READ

SMART CARD button will instruct the V-Smart to read the template list from the card and

display the list of stored templates. In the example shown, there are two templates. The

display shows the Template ID:INDEX followed by the NAME field from the template. The

upper right hand corner of the card has symbol indicating the card is secured.

Pressing either template button (primary or secondary) will instruct the V-Smart to attempt

to read the full fingerprint template data from the smart card. VeriAdmin will prompt the

user for the Site Key (depending on security settings) and if the Site Key entered matches

the Site Key stored on both the V-Smart and the smart card, the template will be read and

the normal Template Editor window will be displayed.

Note: It is possible to edit a template on the card and change either the ID or the Index,

then save the template back to the card. This is NOT recommended because any Wiegand

data associated with the original template will not be saved with the new template.

The DELETE TEMPLATE (1) button will instruct the V-Smart to erase the primary template

stored on the smart card. VeriAdmin will perform a Site Key verification before allowing the

erase to take place. The DELETE TEMPLATE (2) button will instruct the V-Smart to erase

the secondary template stored on the smart card.

Version 4.2 (and above) of VeriAdmin includes a checkbox for READ/WRITE WIEGAND

STRING TO SMART CARD DURING ENROLL/VERIFY. This is a setting which tells the V-

Smart to attempt to read a Wiegand string from the Smart Card during a verify, and send

this Wiegand string out the Wiegand out lines if successful. This check box also means that

VeriAdmin will attempt to save the Wiegand string onto a Smart Card when enrolling. To do

so, it will require that a Wiegand string be read from an external Wiegand input device (the

FROM READER button during Quick or Advanced Enroll). Once you have read in the

Wiegand string, a check box (WIEGAND STRING READ) next to this button will be

checked. If VeriAdmin has not received the Wiegand string, the following dialog will be

displayed: