User's Manual

Veri-Series Setup Guide

h. If templates are saved to the PC or the unit and are to

be distributed to other readers, then this can be done

using the Template Manager functions. In the case of V-

Smart, the template is stored on the smart card and

does not need to be distributed.

2. Using the keypad to enroll a new fingerprint (V-Station only):

a. From the idle screen (showing ”Bioscrypt” with the date

and time), press 0-0-0 (three zeroes) and . You will

be warned about no admin ID.

b. You are now in the V-Station menu system. From here

you may traverse the menus using the and

buttons, the button to enter a menu, and the

button to back out to the previous menu.

c. Enter the Template Admin menu, then the Enroll (Add)

User menu. Enter an enroll ID between 1 and

4294967294.

d. Place your finger on the sensor when the amber LED

turns on, making sure to use the RidgeLock.

e. After retrieving the live fingerprint, you will be shown the

content and quality in stars (asterisks) (5 is the best).

Bioscrypt recommends at least 3 stars for quality and 2

for content. To accept the enrollment, press 1. To reject

it, press 2. To re-try enrollment, press 3.

f. Choose the finger enrolled, 0 - 9 (0 = left pinky, 9 = right

pinky). You may press if you don’t want to specify a

finger.

g. Choose whether the finger should be a Duress finger or

not (0 = No, 1 = Yes, or simply

for No).