User's Manual

Veri-Series Setup Guide

The Veri-Series Product Line

The Veri-Series fingerprint readers are used in access control and

other related fields. There are a variety of features common to

the various products, but there are differences as well, as

described below. For more on the operational differences

between the products please see Basic Operation on page 30.

Common Features

The various products in the Veri-Series line have some features

in common such as both RS-232 and RS-485 serial

communications protocol support for connection to a PC,

Wiegand input and output protocol support for connection to

access control equipment, a wide power input range (9-24

Volts DC) except for the V-Smart (9-12 Volts DC) and V-Station

(12.5-24 Volts DC), and a requirement for earth ground

connection to dissipate static electricity (ESD).

Product Specific Differences

V-Prox

™

: The V-Prox has a built-in HID proximity card reader that

negates the need for external Wiegand input, and provides

one-to-one fingerprint authentication. The V-Prox is capable of

storing up to 4000 fingerprint templates (a “template” is a

mathematical model of the fingerprint that is generated during

enrollment). The device can be mounted on door Mullion or

single-gang electrical box.

V-Flex

™

: The V-Flex has all the capabilities and features of the

V-Prox described above except that there is no built-in HID

proximity card reader. Therefore the V-Flex requires an

external Wiegand input signal. The V-Flex is designed for