User's Manual

V ERIA DMIN M ANAGEMENT S OFTWARE

VeriAdmin Management Software

The VeriAdmin Management Software is designed to run on Windows-based PC platforms and

communicate with Bioscrypt’s MV1100 and MV1200 based fingerprint recognition devices.

Although oriented more towards the Veri-Series products, the application works well with any

MV1100/MV1200-based device. In this documentation, the terms “unit” and “reader” are used

as a generic term to refer to any MV1100/MV1200-based device. At this time, the VeriAdmin

Management Software does NOT communicate with Bioscrypt’s V2100 fingerprint recognition

terminal.

Use the VeriAdmin Management software to perform the following functions:

• Enroll new user fingerprint templates.

• Edit user templates.

• Distribute the user templates from the administration reader or PC to other Bioscrypt

readers in the installation.

• Create “command cards”; proximity cards with the privilege to enroll or delete other user

cards when the unit is used in conjunction with a Proximity Reader as in VeriProx.

• Adjust the parameters (baud rate, security level, port configuration, Wiegand settings,

etc) of individual units, or of all readers connected on an RS-485 network.

• Configure the layout and operation of Smart Cards (for V-Smart only)

NOTE: The recommended operating system for use with the VeriAdmin Management Software

is Windows 2000™, Windows XP™, or Windows NT™ 4.0 (Service Pack 3 or greater).

Operation is possible on Windows 98™ or ME™, however occasional communication packets

can be dropped when multiple applications are running in the background. It is also possible to

run the software on Windows 95™, however, this is not recommended due to communications

irregularities in that version.