User's Manual

A PPENDIX D – V-SMART O PERATIONS

place the smart card near the V-Smart. When this is done, the template is then copied to

the smart card.

Section D.3 – Enrolling a Template Directly to a Smart Card

Using VeriAdmin, the smart card Enrollment process is very similar to a typical enrollment

procedure as described in the QUICK ENROLL section or in the ADVANCED TEMPLATE

ENROLLMENT section. Once a finger is registered and a template created and accepted,

the EDIT TEMPLATE window is displayed as described in the TEMPLATE MANAGER

section. However, for release v4.0 and above the EDIT TEMPLATE window has been

modified to allow for saving the template directly to a Smart Card. As seen below, options

now exist to save the template to the CURRENT UNIT, the PC, or a SMART CARD. By

pressing the SAVE button under SMART CARD, the V-Smart will attempt to write the

template to a smart card held near the smart card reader. Note that a SiteKey verification is

performed before the data is written to the smart card (see appendix E for details).